China high quality #100 Taper Bushed Roller Chain Sprocket ANSI Certified Standard drive sprocket

Product Description

Product Description

#100 Taper Bushed Sprockets

Sprocket Size Tooth Count Bushing Outside Diameter Pitch Diameter Max. Bore Dimension (L) Dimension (C) Type Weight (LBS)
100BTB11 11 1615 5.007 4.437 1-5/8” 1-1/2” 3” B 2.7
100BTB12 12 1615 5.415 4.830 1-5/8” 1-1/2” 3-1/4” B 3.5
100BTB13 13 2012 5.821 5.223 2” 1-1/4” 3-9/16” B 3.6
100BTB14 14 2012 6.227 5.617 2” 1-1/4” 3 -9/16” B 3.9
100BTB15 15 2517 6.631 6.012 2-1/2” 1-3/4” 4-1/4” B 5.0
100BTB16 16 2517 7.034 6.407 2-1/2” 1-3/4” 4-1/2” B 6.4
100BTB17 17 2517 7.437 6.803 2-1/2” 1-3/4” 4-1/2” B 7.1
100BTB18 18 2517 7.839 7.198 2-1/2” 1-3/4” 4-1/2” B 7.8
100BTB19 19 2517 8.241 7.594 2-1/2” 1-3/4” 4-1/2” B 8.7
100BTB20 20 2517 8.642 7.991 2-1/2” 1-3/4” 4-1/2” B 9.6
100BTB21 21 2517 9.043 8.387 2-1/2” 1-3/4” 4-1/2” B 10.6
100BTB22 22 2517 9.444 8.783 2-1/2” 1-3/4” 4-1/2” B 11.0
100BTB24 24 2517 10.245 9.577 2-1/2” 1-3/4” 4-1/2” B 13.0
100BTB26 26 2517 44.045 10.370 2-1/2” 1-3/4” 4-1/2” B 15.0
100BTB28 28 3571 11.844 11.164 3” 2” 5-1/4” B 16.5
100BTB30 30 3571 12.643 11.958 3” 2” 5-1/4” B 22.0
100BTB32 32 3571 13.442 12.753 3” 2” 5-1/4” B 23.0
100BTB35 35 3571 14.639 13.945 3” 2” 5-1/4” B 28.0
100BTB36 36 3571 15.038 14.342 3” 2” 5-1/4” B 31.0
100BTB40 40 3571 16.633 15.932 3” 2” 5-1/4” B 37.0
100BTB45 45 3571 18.626 17.919 3” 2” 5-1/4” B 46.0
100BTB48 48 3571 19.821 19.112 3” 2” 5-1/4” B 53.0
100BTB54 54 3571 22.212 21.498 3” 2” 5-1/4” B 62.0
100BTB60 60 3571 24.601 23.884 3” 2” 5-1/4” B 72.0

#100 Taper Bushed Sprockets

Sprocket Size Tooth Count Bushing Outside Diameter Pitch Diameter Type Max. Bore Dimension (OL) Dimension (L) Dimension (C) Dimension (H) Dimension (P) Dimension (T) Weight (LBS)
100P11H 11 P1 5.571 4.437 4 1-3/4” 2-3/16” 1-15/16” 3” 1-1/4” 0.692 2.8
100Q12H 12 Q1 5.420 4.830 4 2-11/16” 2-27/32” 2-1/2” 1/16” 4-1/8” 1-7/8” 0.692 3.5
100Q13H 13 Q1 5.820 5.223 4 2-11/16” 2-27/32” 2-1/2” 1/16” 4-1/8” 1-7/8” 0.692 4.3
100Q14H 14 Q1 6.230 5.617 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 5.6
100Q15H 15 Q1 6.630 6.012 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 6.6
100Q16H 16 Q1 7.030 6.407 4 2 -11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 7.4
100Q17H 17 Q1 7.440 6.803 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 8.2
100Q18H 18 Q1 7.840 7.198 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 9.0
100Q19H 19 Q1 8.240 7.595 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 9.8
100Q20H 20 Q1 8.640 7.991 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 10.9
100Q21H 21 Q1 9.040 8.387 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 11.8
100R21H 21 R1 9.040 8.387 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 13.3
100Q22H 22 Q1 9.440 8.783 4 2 -1/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 12.6
100Q23H 23 Q1 9.840 9.180 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 13.8
100Q24H 24 Q1 10.250 9.577 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 15.4
100R24H 24 R1 10.250 9.577 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 15.6
100Q25H 25 Q1 10.650 9.973 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 16.0
100R25H 25 R1 10.650 9.973 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 17.0
100Q26H 26 Q1 11.050 10.370 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 17.3
100R26H 26 R1 11.050 10.370 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 17.9
100Q27H 27 Q1 11.440 10.767 4 2-11/16” 2 25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 18.2
100R27H 27 R1 11.440 10.767 4 3-3/4” 3 3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 19.6
100Q28H 28 Q1 11.840 11.164 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 19.6
100R28H 28 R1 11.840 11.164 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 21.0
100Q30H 30 Q1 12.640 11.958 4 2-11/16” 2 -25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 22.4
100R30H 30 R1 12.640 11.958 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 24.5
100Q32 32 Q1 13.440 12.753 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 25.3
100R32 32 R1 13.440 12.753 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 26.5
100Q35 35 Q1 14.640 13.945 4 2-11/16” 2-25/32” 2-1/2” 4-1/8” 1-13/16” 0.692 30.2
100R35 35 R1 14.640 13.945 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 29.8
100R36 36 R1 15.040 14.342 4 3-3/4” 3-5/32” 2-7/8” 5-3/8” 2-3/16” 0.692 33.0
100R40 40 R1 16.630 15.932 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 40.9
100R42 42 R1 17.430 16.727 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 44.3
100R45 45 R1 18.630 17.920 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 50.5
100R48 48 R1 19.820 19.112 4 3-3/4” 3-3/4” 2-7/8” 5-3/8” 2-3/16” 0.692 57.5
100R54 54 R1 22.210 21.498 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 69.0
100R60 60 R1 24.600 23.884 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 54.0
100R70 70 R1 28.580 27.862 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 104.0
100R72 72 R1 29.380 28.657 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 106.0
100R80 80 R1 32.570 31.839 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 135.0
100R84 84 R1 34.160 33.430 5 3-3/4” 3-3/4” 2-7/8” 1-5/16” 5-3/8” 7/8” 0.692 138.0

 

 

Company Profile

 

Services we can provide

1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316 
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore. 
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price. 
8. Welcome OEM / ODM 
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.

 
 

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

sprocket

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China high quality #100 Taper Bushed Roller Chain Sprocket ANSI Certified Standard     drive sprocketChina high quality #100 Taper Bushed Roller Chain Sprocket ANSI Certified Standard     drive sprocket
editor by CX 2023-06-05

QD sprockets

As one of leading QD sprockets manufacturers, suppliers and exporters of mechanical products, We offer QD sprockets and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of QD sprockets

Recent Posts