China Good quality Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket

Product Description

Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld On Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket

Product Description

 

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

Material available

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment

Blacking, galvanization, chroming, electrophoresis, color painting, …

Heat treatment

High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel

qd sprocket

How do I properly install and remove QD sprockets from a shaft?

Proper installation and removal of QD (Quick Detachable) sprockets are crucial for ensuring smooth and efficient power transmission. Follow these steps for both installation and removal:

Installation:

  1. Inspect the Shaft: Before installing a QD sprocket, ensure that the shaft is clean, free from any debris, and has the correct dimensions to match the sprocket’s bore size.
  2. Check the QD Bushing: Verify that the QD bushing is in good condition, and the tapered surfaces are clean and free from any damage. Lubricate the bushing if required.
  3. Position the Sprocket: Place the QD sprocket onto the bushing, ensuring that it fits snugly. Align the sprocket on the shaft according to the desired location.
  4. Hand-Tighten the Bolts: Hand-tighten the set screws on the sprocket to secure it in place on the bushing. Make sure the sprocket is aligned with other components in the drive system.
  5. Use a Torque Wrench: Using a torque wrench, tighten the set screws to the manufacturer’s recommended torque value. This ensures proper clamping force without damaging the components.
  6. Recheck Alignment: After tightening the set screws, recheck the alignment of the sprocket and other drive components. Adjust if necessary.

Removal:

  1. Loosen the Set Screws: To remove the QD sprocket, first, loosen the set screws using the appropriate tools or wrench. Loosen them gradually and evenly to avoid any sudden movements.
  2. Use a Puller (Optional): Depending on the tightness of the fit, you may need a sprocket puller or a jaw puller to aid in the removal process.
  3. Tap the Sprocket: Gently tap the backside of the sprocket using a soft-faced hammer to disengage it from the bushing.
  4. Slide the Sprocket Off: Slowly slide the sprocket off the QD bushing while supporting the sprocket’s weight with your other hand.
  5. Inspect Components: Inspect both the sprocket and the QD bushing for any signs of wear, damage, or deformation. Replace any damaged components before reinstallation.

By following these steps, you can ensure proper installation and removal of QD sprockets, which will help maintain the efficiency and reliability of your power transmission system.

qd sprocket

How do I calculate the required torque for a QD sprocket and shaft setup?

Calculating the required torque for a QD sprocket and shaft setup involves considering several factors:

1. Sprocket Diameter:

Measure the diameter of the QD sprocket.

2. Sprocket Speed:

Determine the rotational speed of the sprocket in revolutions per minute (RPM).

3. Shaft Speed:

Find the rotational speed of the shaft connected to the sprocket in RPM.

4. Shaft Torque:

Calculate the torque required at the shaft using the formula:

Torque (lb-ft) = (Shaft Speed (RPM) * Horsepower) / (5252)

5. Sprocket Torque:

The torque required at the sprocket is the same as the torque required at the shaft since the sprocket and shaft are directly connected.

6. Additional Factors:

Consider any additional factors that may affect the torque requirements, such as shock loads, acceleration, or deceleration.

7. Safety Factor:

It’s essential to apply a safety factor to ensure the system can handle peak loads without failure. The safety factor depends on the application and industry standards.

Once you have calculated the required torque, you can choose an appropriate motor or drive system that can deliver the necessary torque for the QD sprocket and shaft setup.

qd sprocket

Are there different types of QD sprockets available, and how do they vary in design?

Yes, there are different types of QD (Quick Detachable) sprockets available, each varying in design to cater to specific applications and requirements. Some common types of QD sprockets include:

  • Plain Bore QD Sprockets: These sprockets have a simple bore without any specific attachment method. They are designed to be mounted on a shaft using a QD bushing that clamps the sprocket in place.
  • Weld-On QD Sprockets: These sprockets have a weld-on hub that can be permanently attached to a shaft through welding. They offer a secure connection and are often used in heavy-duty applications.
  • Taper-Lock QD Sprockets: These sprockets combine the benefits of both QD and Taper-Lock technologies. They feature a taper-lock bushing system that provides easy mounting and dismounting along with a secure grip on the shaft.
  • QD Double Single Sprockets: These sprockets have two single-row sprockets joined together by a center plate. They are used in applications where multiple chain strands run parallel to each other.
  • Idler QD Sprockets: Idler sprockets do not transmit power but guide the chain and help maintain proper tension in the system. They are commonly used in tensioning systems and reverse bends in conveyor applications.

The design variation allows QD sprockets to be used in diverse applications, offering flexibility in mounting, increased convenience for installation, and facilitating quick replacement without the need for extensive disassembly.

China Good quality Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket  China Good quality Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket
editor by Dream 2024-04-19

Tags: agricultural chain | agricultural chain sprocket | agricultural plastic | agricultural roller | agricultural roller chain | bore roller chain sprocket | bore sprocket | bushing plastic | bushing steel | bushing taper lock | cast chain | cast chain sprocket | cast iron bushing | cast iron sprocket | chain | chain gear | chain plastic sprocket | chain roller | chain roller chain | chain roller sprocket | chain sprocket | chain sprocket roller | china chain | china roller chain | china roller chain lock | china sprocket | gear | gear bushing | gear chain | gear hub | gear lock | gear sprocket | good chain | hub | hub gear | hub sprocket | idler roller chain | idler sprocket | iron bushing | iron chain | lock roller chain | pintle chain | plastic bushing | plastic chain sprocket | plastic gear | plastic roller chain | plastic roller chain sprocket | qd bushing | roller chain | roller chain chain | roller chain gear | roller chain idler | roller chain idler sprocket | roller chain lock | roller chain quality | roller chain sprocket | roller chain stainless steel | roller gear | roller plastic chain | roller sprocket | roller sprocket chain | roller steel chain | sprocket | sprocket bushing | sprocket gear | sprocket hub | sprocket lock | sprocket roller chain | stainless roller chain | stainless steel chain | stainless steel idler sprocket | stainless steel roller chain | steel chain | steel gear hub | steel pintle chain | steel roller chain | steel sprocket | taper bore bushing | taper lock | taper lock bushing | taper lock sprocket

QD sprockets

As one of leading QD sprockets manufacturers, suppliers and exporters of mechanical products, We offer QD sprockets and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of QD sprockets

Recent Posts