China factory Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket

Product Description

Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld On Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket

Product Description

 

European standard sprockets

DIN stock bore sprockets & plateheels

03B-1 04B-1 05B-1-2 06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3
28B-1-2-3 32B-1-2-3

03A-1 04A-1 05A-1-2 06A-1-2-3 081A-1 083A-1/084A-1 085A-1 086A-1 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3
28A-1-2-3 32A-1-2-3

DIN finished bore sprockets

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

stainless steel sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

taper bore sprockets

3/8″×7/32″ 1/2″×5/16″ 5/8″×3/8″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

cast iron sprockets

06B-1-2-3 081B-1 083B-1/084B-1 085B-1 086B-1 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3

platewheels for conveyor chain

20×16mm 30×17.02mm P50 P75 P100

table top wheels

P38.1

idler sprockets with ball bearing

8×1/8″ 3/8″×7/32″ 1/2″×1/8″ 1/2″×3/16″ 1/2″×5/16″ 5/8″×3/8″ 5/8″×3/8″ 5/8″×3/8″ 3/4″×7/16″ 3/4″×7/16″ 1″×17.02mm 1 1/4″×3/4″

double simplex sprockets

06B-1 08B-1 10B-1 12B-1 16B-1

American standard sprockets

ASA stock bore sprockets

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80-80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

finished bore sprockets

stainless steel sprockets

60

double single sprockets&single type Csprockets

taper bore sprockets

35 35-2 -2 50 50-2 60 60-2 80 80-2

double pitch sprockets

2040/2042 2050/2052 2060/2062 2080/2082

sprockets with split taper bushings

40-2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 120 120-2

sprockets with QD bushings

35 35-1 35-2 -2 40-3 50 50-2 50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3

Japan standard sprockets

JIS stock sprockets

140 160

finished bore sprockets

FB25B FB35B FB40B FB50B FB60B FB80B FB100B FB120B

double single sprockets

40SD 50SD 60SD 80SD 100SD

double pitch sprockets

speed-ratio sprockets

C3B9N C3B10N C4B10N C4B11 C4B12 C5B10N C5B11 C5B12N C6B10N C6B11 C6B12

idler sprockets

35BB20H 40BB17H 40BB18H 50BB15H 50BB17H 60BB13H 60BB15H 80BB12H

table top sprockets

P38.1

Material available

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment

Blacking, galvanization, chroming, electrophoresis, color painting, …

Heat treatment

High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …

Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT

2.Quote:We will give you the best price within 24 hours

3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service

4.Processing and customization:Short delivery time

Related products:

Factory:

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Customization:
Available

|

Customized Request

qd sprocket

Can I replace a standard sprocket with a QD sprocket in an existing system?

Yes, you can replace a standard sprocket with a QD (Quick Detachable) sprocket in an existing system, provided that the QD sprocket is compatible with the existing shaft and other components of the system. The primary advantage of using a QD sprocket is its quick and easy installation and removal process, which can significantly reduce downtime during maintenance or sprocket replacement.

To replace a standard sprocket with a QD sprocket, follow these steps:

1. Check Compatibility:

Ensure that the QD sprocket has the same pitch diameter, number of teeth, and bore size as the standard sprocket. Additionally, verify that the shaft diameter and keyway dimensions are compatible with the QD bushing of the new sprocket.

2. Remove the Standard Sprocket:

If the existing sprocket is welded or press-fitted to the shaft, you will need to remove it using appropriate tools. Be cautious not to damage the shaft during the removal process.

3. Install the QD Bushing:

Slide the QD bushing onto the shaft and follow the manufacturer’s instructions for proper installation. Tighten the screws or bolts on the bushing to secure it to the shaft.

4. Mount the QD Sprocket:

Align the QD sprocket with the QD bushing and insert the bushing into the sprocket’s hub. Make sure the sprocket teeth align correctly with the chain or belt.

5. Secure the Sprocket:

Tighten the screws or bolts on the QD sprocket to lock it onto the QD bushing securely. Double-check the alignment and tension of the chain or belt.

6. Perform Necessary Adjustments:

After installing the QD sprocket, check the alignment and tension of the chain or belt. Make any necessary adjustments to ensure smooth power transmission.

Replacing a standard sprocket with a QD sprocket can offer advantages in terms of ease of installation and maintenance. However, it’s crucial to verify compatibility and follow proper installation procedures to avoid any issues and ensure optimal performance in the existing system.

qd sprocket

How do I identify signs of wear, fatigue, or damage in QD sprockets, and when should they be replaced?

Identifying signs of wear, fatigue, or damage in QD sprockets is crucial for maintaining the efficiency and safety of your machinery. Here are some indicators to look for:

  • Visible Tooth Wear: Check the sprocket teeth for signs of wear, such as uneven tooth surfaces or teeth that appear shorter than others. Excessive tooth wear can cause chain slippage and affect the overall performance of the conveyor system.
  • Chipped or Broken Teeth: Inspect the sprocket teeth for any chips or fractures. Chipped or broken teeth can lead to chain jamming and should be replaced promptly to avoid further damage.
  • Deformation: Check for any signs of deformation or bending in the sprocket body. Deformed sprockets can cause misalignment and premature wear on both the sprocket and the chain.
  • Corrosion or Rust: If your sprockets are exposed to harsh environments, look for signs of corrosion or rust. Corrosion can weaken the sprocket material and compromise its structural integrity.
  • Excessive Chain Stretch: Measure the chain’s pitch over multiple sprocket teeth. If you notice significant chain stretch, it may be time to replace both the chain and sprockets together to maintain proper engagement.
  • Noise and Vibration: Unusual noise or increased vibration during operation can be indicative of sprocket wear or misalignment. Addressing these issues promptly can prevent further damage.
  • Regular Maintenance: Implement a regular maintenance schedule and inspect the sprockets at specified intervals. This proactive approach can help detect wear or damage early and avoid costly breakdowns.

Once you identify signs of wear, fatigue, or damage in QD sprockets, it is essential to replace them promptly to prevent further deterioration and potential system failures. Regular inspections and timely replacements are key to extending the lifespan of your sprockets and ensuring the reliability of your conveyor system.

qd sprocket

How do I choose the right size and pitch of a QD sprocket for my machinery?

Choosing the right size and pitch of a QD (Quick Detachable) sprocket is crucial for ensuring proper power transmission and optimal performance in your machinery. Here are the steps to guide you in the selection process:

  1. Identify the Sprocket Type: Determine the type of sprocket you need based on your application. Consider whether you require a roller chain sprocket, a conveyor sprocket, or any other specific type that suits your machinery’s power transmission requirements.
  2. Know the Number of Teeth: Calculate the number of teeth required for the sprocket. The number of teeth affects the sprocket’s speed ratio and torque output, so it’s essential to select the right tooth count to match your machinery’s needs.
  3. Calculate the Pitch Diameter: The pitch diameter is the diameter of the circle formed by the centerline of the sprocket’s teeth. Calculate the pitch diameter based on the number of teeth and the pitch of the chain or belt you plan to use with the sprocket.
  4. Consider the Bushing Size: QD sprockets come with various bushing sizes to fit different shaft diameters. Measure the diameter of your machinery’s shaft and choose a QD sprocket with a compatible bushing size that fits securely on the shaft.
  5. Verify Material and Strength: Check the material and strength specifications of the QD sprocket to ensure it can handle the load and operating conditions of your machinery. For heavy-duty applications or harsh environments, opt for sprockets made from durable materials like steel or cast iron.
  6. Check Hub Projection: The hub projection is the distance from the back of the sprocket to the center of the bushing when the sprocket is mounted on the shaft. Ensure that the hub projection fits within the available space in your machinery without causing interference or clearance issues.
  7. Consult with Manufacturers or Experts: If you are unsure about the right QD sprocket size and pitch for your machinery, don’t hesitate to seek advice from sprocket manufacturers or industry experts. They can help you determine the most suitable sprocket for your specific application.

By following these steps and considering the specific requirements of your machinery, you can confidently choose the right size and pitch of a QD sprocket for your power transmission needs, ensuring efficient and reliable operation.

China factory Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket  China factory Stainless Steel Plastic Roller Chain Gear Platewheel Engineer Class Agricultural Pintle Cast Iron Weld on Hub Finished Bore Idler Bushing Taper Lock Qd Sprocket
editor by Dream 2024-05-15

Tags: agricultural chain | agricultural chain sprocket | agricultural plastic | agricultural roller | agricultural roller chain | bore roller chain sprocket | bore sprocket | bushing plastic | bushing steel | bushing taper lock | cast chain | cast chain sprocket | cast iron bushing | cast iron sprocket | chain | chain gear | chain plastic sprocket | chain roller | chain roller chain | chain roller sprocket | chain sprocket | chain sprocket roller | china chain | china roller chain | china roller chain lock | china sprocket | gear | gear bushing | gear chain | gear hub | gear lock | gear sprocket | hub | hub gear | hub sprocket | idler roller chain | idler sprocket | iron bushing | iron chain | lock roller chain | pintle chain | plastic bushing | plastic chain sprocket | plastic gear | plastic roller chain | plastic roller chain sprocket | qd bushing | roller chain | roller chain chain | roller chain factory | roller chain gear | roller chain idler | roller chain idler sprocket | roller chain lock | roller chain sprocket | roller chain stainless steel | roller gear | roller plastic chain | roller sprocket | roller sprocket chain | roller steel chain | sprocket | sprocket bushing | sprocket gear | sprocket hub | sprocket lock | sprocket roller chain | stainless roller chain | stainless steel chain | stainless steel idler sprocket | stainless steel roller chain | steel chain | steel gear hub | steel pintle chain | steel roller chain | steel sprocket | taper bore bushing | taper lock | taper lock bushing | taper lock sprocket

QD sprockets

As one of leading QD sprockets manufacturers, suppliers and exporters of mechanical products, We offer QD sprockets and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of QD sprockets

Recent Posts