China 1000W Mid Drive Motor kits 420 Sprocket with EM50SP controller for electric scooter bike wholesaler

Design Quantity: Mid push motor
Warranty: Supply
Item Identify: 1000W ninety 70H Mid Generate Motor kits 420 Sprocket with EM50SP controller
Voltage(V): 60V or 72V(as default)
Output Electrical power(W): 1000W
Use: electric scooter/e-bicycle/e-bike
Kind: Mid drive motor
Efficiency: eighty four~ninety%
Speed: 60V@45KPH 72V@55KPH
Shade: Black
Water-resistant Grade: IP54
Certification: ISO9001, CCC, CE
Packaging Specifics: Carton Box

1000W ninety 70H Mid Push Motor kits 420 Sprocket with EM50SP controller for electric powered scooter
For ninety 1000W mid generate motor, it could be utilised for electrical scooter, electrical motorcycle.
It could be 72V 55KPH, accessible for 10inch wheel kits.
QS can supply customized 420 14teeth sprocket to match with 1kW mid push motor.

Kits including
one. 1pcs X QSMOTOR 1000W PMSM IPM mid drive motor with sprocket 420 fourteen tooth
2. 1pcs X Votol EM50SP sine wave motor controller
3. 1pcs X DKD Liquid crystal display speedometer
4. 1pcs X Z6 throttle with blend switch

Crucial Functions
1) Mild fat and small dimension evaluate to hub motor
2) Large overall performance reward from flux weakening
three) High effeciency in the course of climbing, and much better acceleration
4) Assist regenerative braking

Solution description
one. QSMOTOR 1000W 90 80H Mid Push Motor

  • Merchandise: QS Motor 1000W 90 80H Mid Generate Motor
  • Motor Sort: BLDC Long lasting Magnet Internal Rotor Motor With Corridor Sensor
  • Brand: QS Motor, QSMOTOR
  • Motor Design: Solitary axle
  • Matched Wheel: 10inch Wheel (as default)
  • Magnet Peak: 80mm, 5 pole pairs
  • Diameter of stator: 120mm
  • Rated Electrical power: 1000W
  • Rated Voltage: 60V or 72V(as default)
  • Speed: 60V@45KPH 72V@55KPH
  • Max Torque: approx twenty five.2N.m without having Reduction ratio, approx 134.0N.m with 1:5.3 Reduction ratio
  • Max Efficiency: ninety.5%
  • Thermal Probe: None as default (KTY83/122 is available, if you want, you should let sales guy know).
  • Single Hall Plate with water-resistant connectors
  • 6mm² Cross Section of Stage Wire (not incorporate insulation layer)
  • Hall Sensor Phasing angle: 120 diploma
  • Water-resistant Grade: IP54
  • Shade: Black
  • N.W./G.W.: 7.8kgs/9.1kgs
  • Deal Dimension: 34cm*34cm*33cm
  • Images Show

    Drawing(for normal)

    Check Report

    2. EM50SP 72V sinusoidal wave BLDC motor controller
    Sine wave controller, programmable, with regen purpose
    Net weight: 955g
    Rated existing: 60A
    Improve present: a hundred ninety
    Max. Electrical power: 4320W
    Flux Weakening Ratio: one hundred~250%
    Max. Effectiveness: 88~ninety three%
    Degree of defense: IP67
    Photos Present

    Drawing(for normal)

    3. DKD Lcd speedometer, can-bus(optional, CZPT adaptable Double Disc coupling LIN as default)
    It screen D N R, P, S equipment, and battery present X5/ten.
    P.s.: If the doing work battery isn’t going to have can-bus interaction, then the can-bus speedometer will displays deficiency of electrical power usually.
    So, we recommend to do the speedometer as Line communication model if consumer can’t get can-bus battery.

    4. Z6 throttle with mixture change
    With Reverse, Parking button( throttle on/off), 3 slide change equipment, s/increase button, Mild and Horn.
    It match with VOTOL controller properly.

    Make sure you noted:
    Optional physical appearance, drawing, functionality curve/test report are available.
    If you need far more technological data, make sure you really feel free of charge to make contact with us.
    We will give you reply in 12hours.


    How to Advise you appropriate motors?
    To begin with, To customise a appropriate electric hub motor for your automobile, could you make sure you advise the points in beneath?
    1. E-bicycle, E-scooter, High torque Clamp Sort corrugated shaft coupling Manufacturing unit immediate sale versatile stainless steel bellows coupling Scorching Sale E-tricycle or E-car?
    two. Weight of car with battery, loading bodyweight (weight with load only)?
    3. Tire product/diameter?
    4. Rated voltage and wattage of motor, nominal velocity/leading speed, and climb angle or torque @ what pace?
    five. Battery nominal voltage, CZPT voltage, capacity and car range?
    6. What’s the drop-outs/rear fork width of your frame?
    Within your details data, we could make evaluation and calculation accordingly for your venture

    Company Data About US
    SIAECOSYS is an union of manufactories in electrical driving sector, and belongs to HangZhou SIA Buying and selling Co., Ltd that established from QS Factory in 2013 year.
    At present, a lot more than 80 leading factories be part of SIAECOSYS, and they are willing to offer personalized items and service for international buyers who has enthusiasm in e-scooter/tricycle/auto market.
    SIAECOSYS focus on organizing member factories with each other to customize particular e-driving system answer and items for distinct needs from customers in the globe.
    Presently, SIAECOSYS has a lot more than 5000 buyers from the planet and far more than 40 buyers send out inquiry every day.
    SIAECOSYS has sale division, Technology department, Quality inspection office, basic accounting office, obtain office and following-sale provider division.

    FAQQ1. Are you trader or manufacture?
    A: We are manufacture.

    Q2. How lengthy is your creation time?A: Generally, Personalized layout normal extend flange sort SWC-BF cardan shaft the production time period is twelve-14 working times(6 working days for each 7 days).
    The specific shipping time relies upon on the things and the quantity of your purchase.Q3. How prolonged is your guarantee time?
    A: For motor, the warranty time is 1 calendar year and 3 months. For other parts, the warranty time is 1 year.

    This fall. About Customs Clearance
    For some specific nations with rigorous customs for import, so pls. verify it to start with to us that you have ability to do customs clearance, or else we will not just take on weighty responsibilities for this concern, return funds and goods are not support.
    Special nations checklist:
    Argentina, Brazil, Egypt, Turkey, Iran,Portugal,Romania, Kazakhstan, Ukraine, Yeman and so on.
    Some nations title not detailed, the salesman will notify you in time if you positioned the purchase on-line immediately. Thank you for your comprehension.

    05. Does your merchandise with CE certification?
    Of course, our motor with Certification (CE, CCC), SWC-BH regular flex welding type universal coupling expert custom-made cardan shaft coupling industrial equipment and our factory with certification of ISO9001, TS86949


    What is a sprocket?

    A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
    The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
    as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
    In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
    Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
    The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

    ISO sprocket uniformity

    ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
    ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

    metal sprocket

    Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
    This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
    The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
    Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.

    plastic sprocket

    Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
    One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
    There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
    If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
    Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.

    Aluminum sprocket

    Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
    The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
    China 1000W Mid Drive Motor kits 420 Sprocket with EM50SP controller for electric scooter bike     wholesaler China 1000W Mid Drive Motor kits 420 Sprocket with EM50SP controller for electric scooter bike     wholesaler
    editor by Cx 2023-06-15

    QD sprockets

    As one of leading QD sprockets manufacturers, suppliers and exporters of mechanical products, We offer QD sprockets and many other products.

    Please contact us for details.

    Mail:[email protected]

    Manufacturer supplier exporter of QD sprockets

    Recent Posts